Back in October, we posted about D325f-SDR, which turns the Qualcomm modem in an old LG phone into an SDR, and we posted an update last week. Now Piotr Krysik has written in to share HaxaWave, a similar project but for the MSM8916 modem in a Wileyfox Swift phone. Piotr notes that it has been in the works since before these phone SDRs started appearing this year.

HaxaWave is receive-only and needs no hardware modification. It tunes 735-995 MHz and 1195-2700 MHz at up to 14.8 MS/s, limited by the phone's USB 2.0 port.
Piotr notes that sensitivity varies strongly across the range because of the filters in the phone's receive path. The phone runs Nura (formerly postmarketOS) and shows up as a SoapySDR device, so programs like SDR++ work on a PC over USB networking, or on the phone itself.

Rather than patching the stock modem image, the firmware is built from Qualcomm's public modem_proc source with a few small patches. The SDR itself is a Hexagon DSP program loaded at run time, and the stock firmware can be selected again at any time. The project is experimental and tested on one phone only. The code is open source under the GPL-3.0 licence and available on GitHub, along with a build and install guide and a description of how the receive path works.

Block Diagram of the MSM8916 Modem
Block Diagram of the MSM8916 Modem

HaxaWave: Comparing a USRP B210 with the modem of a phone used as an SDR

AI Disclaimer: Piotr notes that the project was developed with the help of LLM tools, and the README states that language models did a large part of the work.