In response to increasing cyberattacks against U.S. public water systems, the U.S. Environmental Protection Agency (EPA) has announced that it will be stepping up enforcement of the cybersecurity requirements spelled out in the Safe Drinking Water Act (SDWA) and the America’s Water Infrastructure Act (AWIA). These laws require community water services to perform regular Risk and Resilience Assessments (RRAs) of their infrastructure and develop appropriate response plans. Unsurprisingly, cybersecurity plays a key role in both of these requirements. 

This increased scrutiny comes in response to a wave of state-sponsored cyberattacks against U.S. critical infrastructure, particularly public water and wastewater systems. Potential adversaries include the PRC-affiliated Volt Typhoon group, pro-Russian hacktivist groups, and arms of the Iranian Government Islamic Revolutionary Guard Corps (IRGC) which have all been tied to cyber incidents in U.S. water systems. Naturally, such activity raises the risk of these or similar threat actors attempting to disrupt the U.S. water supply in the future. 

Requirements, Deadlines, and Enforcement

AWIA Section 2013 states that any water system serving more than 3,300 people must perform an initial Risk and Resilience Assessment. The RRA “must include ‘electronic, computer, or other automated systems (including the security of such systems),’ otherwise known as cybersecurity.” Next, the organization must develop a written Emergency Response Plan (ERP) within six months of completing the risk assessment. The ERP must address both the physical security and cybersecurity of systems and define a clear strategy for mitigating risks, detecting threats, and responding to incidents.

Initial certifications began in 2020 with deadlines being staggered by the size of the community water system (see table below). However, the EPA has found many of these initial efforts lacking. Inspections beginning in 2023 found that over 70% of systems failed to meet basic requirements including missing sections of the RRA and ERP. This high failure rate has spurred EPA to further increase the number of inspections going forward.

EPA also has a variety of enforcement options when violations are found. Section 1431, Emergency Powers gives the EPA the authority to force corrective action and can require water systems to provide alternate sources of water for users until problems are resolved. Additionally, EPA can levy civil penalties of up to $15,000 for every day that the system is out of compliance. 

And even for systems that are in compliance today, there are new certifications on the horizon. The law states that each RRA and ERP must be updated every 5 years, so the next round of certifications will begin in March 2025. So whether due to increased EPA inspections or looming recertification deadlines, most every community water system should be thinking about cybersecurity.

Key Steps for Better Cybersecurity 

The EPA provides a variety of guidance for water systems that are seeking to enhance their cybersecurity posture. Earlier this year, the EPA, FBI, and CISA jointly published the following list of recommendations titled, Top Cyber Actions for Securing Water Systems:

1. Reduce exposure to public-facing internet
2. Conduct regular cybersecurity assessments
3. Change default passwords immediately
4. Conduct an inventory of OT/IT assets
5. Develop and exercise cybersecurity incident response and recovery plans
6. Backup OT/IT systems
7. Reduce exposure to vulnerabilities
8. Conduct cybersecurity awareness training

While this list provides a good high-level starting point, the EPA also provides resources such as the Water Cybersecurity Assessment Tool and Risk Mitigation Template (xslx). This guide notably has sections dedicated to Vulnerability Management, Device Security, and Supply Chain Security, all of which are areas where Eclypsium can help as detailed in the table below.
Instructions on how to use the tool can be found in the Water Sector Cybersecurity Risk Management Guidance from the American Water Works Association. This document also includes cross-references with NIST standards and the NIST Cyber Security Framework (CSF) meant to help water and wastewater utilities with AWIA §2013 compliance. Notably, the NIST CSF specifically calls for monitoring of firmware integrity in IT and OT systems, which is a capability that many organizations rely on Eclypsium to assist with.

Key Take-Aways

It is important to note that this enhanced focus on cybersecurity is not unique to the EPA or public water systems. Nation-state adversaries have increasingly targeted a wide range of critical infrastructure and services in the United States, which in turn, has forced federal agencies to step up their level of oversight. For example, to protect the power grid, NERC has enhanced its Critical Infrastructure Protection or CIP, the Department of Health and Human Services (HHS) has published enhanced Acceptable Risk Safeguards (ARS) to protect medical data, and the FBI’s Criminal Justice Information Services have stepped up requirements and auditing for law enforcement agencies that use FBI data.

And when it comes to critical infrastructure such as power and water, the greatest risk is that adversaries would be able to disrupt or contaminate services. This is precisely why there is such a renewed focus on device-level and firmware security. By corrupting firmware, attackers can completely disable devices in ways that are extremely hard to recover from if at all. Attackers have already demonstrated the ability to “brick” servers and laptops by corrupting firmware, however the stakes are greatly magnified if and when those techniques are applied to critical infrastructure or the systems that support them. 

This is why organizations simply must be able to assess their critical assets at all levels including all supply chain code and components. Staff must be able to consistently audit the posture and verify the integrity of each device. Eclypsium’s Supply Chain Security Platform specializes in these tasks, and can turn highly technical audits into simple automated scans. 

To learn more, we encourage you to schedule a demo with the Eclypsium team or review any of the following resources: 

• Ultimate Guide to Supply Chain Security [PDF]
• Firmware, Supply Chain, and Frameworks: NIST SP 800-53 [PDF]
• Eclypsium solutions page for regulatory compliance

The post EPA Steps Up Cybersecurity Audits for Water Systems appeared first on Eclypsium | Supply Chain Security for the Modern Enterprise.

*** This is a Security Bloggers Network syndicated blog from Eclypsium | Supply Chain Security for the Modern Enterprise authored by Chris Garland. Read the original post at: https://eclypsium.com/blog/epa-steps-up-cybersecurity-audits-for-water-systems/