geacon_pro
2022-11-17 21:46:39 Author: github.com(查看原文) 阅读量:104 收藏

中文说明在这里

Introduction

geacon_pro is an Anti-Virus bypassing CobaltStrike Beacon written in Golang based on geacon project.

geacon_pro supports CobaltStrike version 4.1+

geacon_pro has implemented most functions of Beacon.

We will continue to follow up the method of bypassing Anti-Virus and keep geacon_pro from being detected by Anti-Virus. We will also integrate the pen test tools which can bypass Anti-Virus. We hope that geacon_pro can be made into a cross-platform bypass Anti-Virus tool that is not limited to CobaltStrike native functions in the future. Discussions are welcome if you have relevant needs or ideas. your support and discussion is the driving force for us to move forward.

This project is only for learning CobaltStrike protocol. Please do not use it for any illegal purpose, and the consequences arising therefrom shall be borne by yourself.

This project is developed by me and Z3ratu1. He has implemented a version of geacon_plus that supports CobaltStrike version 4.0. geacon_pro supports version 4.1 and above. Functions of these two projects are almost same while encapsulation is slightly different.

Loading the shellcode of Beacon through various loaders is the traditional method to bypass Anti-Virus. However, some Anti-Virus check the memory characteristics of Beacon strictly, especially Kaspersky, so it is better to rebuild one by yourself.

The core of bypassing Anti-Virus can be reflected in three aspects:

  • There is no CobaltStrike Beacon feature.
  • Viruses written in Golang can bypass the detection of antivirus software to a certain extent.
  • Some dangerous functions which can be easily detected by antivirus software has been changed to more stealthy implementations.

The currently implemented functions can pass Defender, 360 core crystal (except powershell, you can use the tool I provide below), Kaspersky (except memory operations, such as injecting native CobaltStrike dll), and Huorong. Other antivirus software has not been tested yet, please contact me if you have relevant requirements.

In order to avoid 360's monitoring of the fork&&run operation, geacon_pro currently injects CobaltStrike native dll into itself rather than into the temporary process. However, we found that the CobaltStrike native powerpick function sometimes fails to get the echo when it is injected into geacon_pro itself, while is works well in the fork&&run mode. Therefore, you can use execute-assembly to execute this powershell-bypass tool, which can bypass Defender, 360, etc.

If you want to make bypassUAC avoid the detection of antivirus software, please using execute-assembly to execute the Csharp version of this project. Although the Csharp program will be detected by 360 when it is on the disk, it can bypass Defender and 360 by executing in memory using execute-assembly. The dll version of this project can bypass Anti-Virus, but it needs to be uploaded and executed with rundll32.

geacon_pro is still in development, the current version may have some incomplete functions. Please contact me if you have any needs.

If you have a good solution for heap memory encryption, welcome to discuss, my implementation ideas are in the implementation details.

How to use geacon_pro

geacon_pro supports Windows, Linux and Mac.

For the basic usage, please refer to the original project geacon. Adding -ldflags "-H windowsgui -s -w" when compiling binary can reduce the program size and hide the cmd window. When compiling for linux and mac, adding -ldflags "-s -w" can reduce the size of the program, and then run it in the background.

The simplest way to use geacon_pro is to modify the public key and C2 server address in config.go, and then replace the C2profile with the following example.

At present, the project has some console output content, you can delete the related code to remove it.

If your CobaltStrike's magic number changed from 48879 to other number before, it may cause the authentication to fail. In that case you can try to change the 0xBEEF in meta.go to the value you have changed.

Functions

Windows platform:

sleep, shell, upload, download, exit, cd, pwd, file_browse, ps, kill, getuid, mkdir, rm, cp, mv, run, execute, drives, powershell-import, powershell, execute-assembly, Multiple thread injection methods (you can replace the source code yourself), shinject, dllinject, pipe, Various CobaltStrike native reflection dll injection (mimikatz, portscan, screenshot, keylogger, etc.), steal_token, rev2self, make_token, proxy, etc.

Linux, Mac platform:

sleep, shell, upload, download, exit, cd, pwd, file_browse, ps, kill, getuid, mkdir, rm, cp, mv, etc.

The process management and the file management support graphical interaction.

C2profile:

geacon_pro adapts the settings on the flow of C2profile and some settings on the host. The supported encoding algorithms are base64, base64url, mask, netbios, netbiosu. Details can be found in config.go. Here is an example C2profile. IMPORTANT!!! After modifying the C2profile, do not forget to sync the changes in config.go:

# default sleep time is 60s
set sleeptime "3000";

https-certificate {
set C "KZ";
set CN "foren.zik";
set O "NN Fern Sub";
set OU "NN Fern";
set ST "KZ";
set validity "365";
}

# define indicators for an HTTP GET
http-get {

set uri "/www/handle/doc";

client {
#header "Host" "aliyun.com";
# base64 encode session metadata and store it in the Cookie header.
metadata {
			base64url;
prepend "SESSIONID=";
header "Cookie";
}
	}

	server {
		# server should send output with no changes
#header "Content-Type" "application/octet-stream";
header "Server" "nginx/1.10.3 (Ubuntu)";
header "Content-Type" "application/octet-stream";
header "Connection" "keep-alive";
header "Vary" "Accept";
header "Pragma" "public";
header "Expires" "0";
header "Cache-Control" "must-revalidate, post-check=0, pre-check=0";

output {
			mask;
netbios;
prepend "data=";
append "%%";
print;
}
	}
}

# define indicators for an HTTP 
http-post {
	# Same as above, Beacon will randomly choose from this pool of URIs [if multiple URIs are provided]
set uri "/IMXo";
client {
#header "Content-Type" "application/octet-stream";

# transmit our session identifier as /submit.php?id=[identifier]

id {				
			mask;
netbiosu;
prepend "user=";
append "%%";
header "User";
}

		# post our output with no real changes
		output {
			mask;
base64url;
prepend "data=";
append "%%";
print;
}
	}

	# The server's response to our HTTP POST
	server {
		header "Server" "nginx/1.10.3 (Ubuntu)";
header "Content-Type" "application/octet-stream";
header "Connection" "keep-alive";
header "Vary" "Accept";
header "Pragma" "public";
header "Expires" "0";
header "Cache-Control" "must-revalidate, post-check=0, pre-check=0";

		# this will just print an empty string, meh...
output {
			mask;
netbios;
prepend "data=";
append "%%";
print;
}
	}
}

post-ex {
set spawnto_x86 "c:\\windows\\syswow64\\rundll32.exe";
set spawnto_x64 "c:\\windows\\system32\\rundll32.exe";

set thread_hint "ntdll.dll!RtlUserThreadStart+0x1000";
set pipename "DserNamePipe##, PGMessagePipe##, MsFteWds##";
set keylogger "SetWindowsHookEx";
}

Functions need to be improved

  • Heap memory encryption is currently unstable and has not been officially used.
  • Modify the problem of Chinese display error under some functions.
  • Some functions do not support x86 system yet (I am too busy recently, and I will modify it as soon as possible).

To do in the future

  • Implement more functions.
  • Integrate the pen test tools which can bypass Anti-Virus.
  • Implement more functions under Linux and Mac.
  • Implement the function of code obfuscation.

Code structure

config

  • Public key, C2 server address, https communication, timeout time, proxy and other settings
  • C2profile settings

crypt

  • AES, RSA encryption algorithm required for communication
  • Implementation of C2profile Encryption Algorithm

packet

  • charset: The implementation of changing GBK to UTF-8
  • Commands: The implementation of some functions under each platform
  • execute_assembly: The implementation of executing c# in memory under the windows platform
  • heap: The implementation of heap memory encryption under the windows platform
  • http: The implementation of sending the package
  • inject: The implementation of injecting your shellcode/reflective dll into the process under the windows platform
  • Jobs: The implementation of injecting the CobaltStrike native reflection dll under the windows platform and using namedpipe to return result
  • Packet: The implementation of the function required for communication
  • Token: The implementation of the token-related functions under the windows platform

services

Implement the Cross-platform encapsulation of the functions in packet, which is convenient for main.go to use

sysinfo

  • meta: The implementation of processing the meta information
  • sysinfo: The implementation of obtaining the information of related processes and systems under different platforms

main.go

The main function parses and executes each command, then returns results or errors

Implementation details of some functions

shell

The shell command called golang's os/exec library directly before, and now it is changed to the implementation of the winapi CreateProcess. The only difference from run command is that the shell calls cmd and run does not.

run && execute

The difference between run and execute is that run can return the result of execution while execute does not. The underlying implementation difference is that run returns the result of execution through the pipeline while execute does not.

The implementations of shell, run, and execute call CreateProcess without stealing the token, and call CreateProcessWithTokenW after stealing the token to execute the command with the token privilege.

powershell-import

The implementation of the powershell-import is the same as of CobaltStrike. First, save the input powershell module, then open a port locally and put the module on it when executing the powershell command. Powershell directly requests the port to load the powershell module without landing. Without loading the powershell module on the ground, some anti-virus software can not detect malicious powershell module.

powershell

The powershell command directly invokes powershell and will be monitored by 360. You can try to execute it with the tool mentioned earlier.

execute-assembly

The implementation of execute-assembly is not the same as the native implementation of CobaltStrike. The main part of the content CobaltStrike's beacon receives from the server is the program of c# and the dll used to open the .net environment. The beacon of CobaltStrike first opens a process(the default is rundll32), then injects the dll used to open the environment into the process, and finally injects the c# program into this process to execute it. Considering that the steps are too complete and it is difficult to get the result of execution, we directly use this project to implement the function of execute-assembly, but we have not tested it on all versions of windows.

process injection

The implementation of shinject and dllinject all use APC injection.

reflective dll injection

CobaltStrike's beacon first opens a rundll32 process then injects reflective dll in it and execute. However, it will be detected by the 360 core crystal. I tried to use methods such as native or unhook and failed, and finally found that injecting dll into geacon_pro itself will not be detected, so I consider changing the fork&run method of CobaltStrike to the method of injecting geacon_pro itself. Since CobaltStrike inject reflective dll in the form of fork&&run, some dlls need to execute ExitProcess at the end of job.

1666934161850

However, if we inject geacon_pro itself, the main thread of geacon_pro will be exited, so we need to make simple modifications to the delivered dll. We replace the ExitProcess string in the dll with ExitThread+\x00.

The dll sends the result back to the server asynchronously through the pipe. The current reflective dll injection adopts the method of injecting geacon_pro itself, and we are going to make user choose the injection method through the config.go.

token

The part of the token currently implements steal_token, make_token and rev2self.

the connection of server and hosts on the intranet

It is a common case that the intranet hosts need to connect to C2 server. If the edge host connects internet while the intranet hosts doesn't, geacon_pro can connect to server through the proxy of the edge host by setting the configuration in config.go. That is, if a http proxy is opened on port 8080 of the edge host, then setting ProxyOn to true in config.go and Proxy to http://ip:8080 can make the hosts on the intranet connect to our C2 server.

heap memory encryption

The implementation of heap memory encryption refers to this project. Suspend threads other than the main thread before sleep, and then traverse the heap to encrypt the heap memory. Decrypt and resume the thread after sleep. However, the implementation is relatively unstable, sometimes it will suddenly get stuck or exit directly during heap traversal, and considering that there may be persistent jobs such as keylogger or portscan in the background, it seems inappropriate to suspend all threads. If you have Good ideas about heap memory encryption, welcome to discuss. At the same time, I do not quite understand why Golang's time.Sleep function will sleep forever after other threads are suspended, but calling windows.SleepEx works fine, I hope you can answer it.

charset

Since Golang processes string as UTF-8 by default, we decide to hardcode the communication charset between geacon_pro and CS server to UTF-8. Since Linux and macOS also use UTF-8 as default charset, we only need to convert the output of windows. Now we only convert GBK charset to UTF8, avoiding the problem of Chinese garbled.

404Starlink

image

geacon_pro has joined 404Starlink


文章来源: https://github.com/y35uishere/geacon_pro
如有侵权请联系:admin#unsafe.sh