Furrion Digital Wireless Camera - Standalone usage - decoding
2021-03-20 17:09:38 Author: www.reddit.com(查看原文) 阅读量:208 收藏

Hi,

Got my hands on this little interesting device, a curiosity and a challenge waiting to be resolved.

This is a wireless camera, part of this product:

Product: Digital Wireless Observation Camera System Model Name: FOS48TA-BL Product: Digital Wireless Camera Model Name: FOC48TA-BL FCC ID: 2ABH3FOC4

I do not have the display component that is part of the observation system. It decodes the camera data and display on screen. Without it, I need to connect to the camera, decode the camera data, configure camera settings.

Ideally, using the camera by itself using a Raspberry Pi... Thoughs ? Comment ?

—————————————————————————————————————

Wireless Observation System Operating and Installation Instructions

https://www.manualslib.com/manual/1607861/Furrion-Fos48tapk-Bl.html

https://furrion.com/products/replacement-vision-1-camera

Technical specification of Camera unit:

  1. Working voltage: DC8-30V

  2. Working current: ≤220mA

  3. Transmitting distance: ≥100M (open area outdoors)

  4. Size of image sensor 1/4 inch Color CMOS VGA

  5. Quality of image: Max.25frame/sec @ QVGA (frame rate adjusts dynamically according to the image)

  6. Specification of camera: Focal length f1.7mm, aperture F2.0, IR filter 850nm

  7. IR emission wavelength: 850nm

  8. IR view distance: ≥1.5M

  9. IR LED lit condition: Brightness ≤2Lux

  10. Working temperature: -10/+50

—————-

https://imgur.com/a/1nM5shw/


文章来源: https://www.reddit.com/r/ReverseEngineering/comments/m921th/furrion_digital_wireless_camera_standalone_usage/
如有侵权请联系:admin#unsafe.sh